Vodeno hlađenje Arctic Liquid Freezer II 420, 3x140mm, Intel i AMD, crno
GLAVNE SPECIFIKACIJE:
- Podnožje AMD: AM4/AM5
- Podnožje Intel: LGA1200/1700
- Veličina ventilatora : 3x140mm
- RGB: NE
Sviđa mi se (0)
199,00 €
72 mj. jamstvo
Izaberite način plaćanja internet bankarstvom i ostvarite dodatnih 5% popusta.
Iznos uštede
9,95 €
72 mj. jamstvo
U vanjskom skladištu
, vrijeme isporuke: 5 - 7 dana
Prodaja na rate bez kamata
već od
8,29 €
mjesečno
Plaćanje na 24 rate beskamatno online
Plaćanje na 12 rata beskamatno i jednokratno online
Plaćanje pouzećem i karticama na rate!
Ekspresna dostava 2.89 €
Sigurna kupovina
Opis
Optimised for AMD Ryzen
AMD has been using a new multi-die layout for its high-end AM4 processors for a few generations now. In these processors, the hotspot is not centered by the IHS (Integrated Heat Spreader). To still allow for optimal heat dissipation, we have developed a special mounting kit for the Liquid Freezer II that allows the cold plate to be placed directly over the hotspot of the CPU. AMD's upcoming 7000 series AM5 processors also come with multi-die layouts and can therefore benefit from the Liquid Freezer II's unique offset mounting.
Outstanding Performance
The all-in-one cooling handles the entire cooling requirements — even of the most powerful processors from Intel and AMD. It performs effortlessly with over 200 W of heat to be dissipated, which is why your CPU can be kept cool even in extreme overclocking. When it comes to competitive products from leading cooler manufacturers, the Liquid Freezer II leaves them behind in terms of both performance and noise level.
Efficient, Proprietary Pump
While many competitors use a generic water pump, we‘ve gone to great lengths to develop our own. The results? Quieter operation and higher efficiency. And, like the Liquid Freezer II’s fans, the water pump is PWM-controlled and adjusts its speed accordingly. This not only leads to significantly lower noise levels at low and typical loads, but also a much lower power consumption for all components of the AiO.
Premium Class Radiator
Unlike most all-in-one liquid cooling manufacturers, we rely on 38 mm thick radiators with a high fin density. This allows a larger amount of water to be used in the circuit and significantly increases the cooling surface area.
Water has a much higher heat capacity than aluminum or copper. This leads to a slower and an up to 5 °C lower temperature increase in the time-limited turbo mode of modern CPUs.
Specifications:
Compatibility
Intel Socket: 1700, 1200, 115X, 2011-3*, 2066* *Square ILM
AMD Socket: AM5, AM4
Pump/Cold Plate
VRM Fan: 40 mm, 1000—3000 rpm (PWM controlled)
Pump: 800—2000 rpm (PWM controlled)
Power Consumption: 0.5 W—2.7 W (Pump + VRM Fan)
Cold Plate: Copper, Micro-Skived-Fins
Thermal Paste: MX-4 (0.8 g)
Fan
Fan: ARCTIC P14 PWM 140 mm Fan x3
Fan Speed: 200—1700 rpm PWM Controlled (0 rpm below 5% PWM)
Fan Bearing: Fluid Dynamic Bearing
Noise Level: 0.3 Sone
Current: 0.12 A | 12 V DC
Airflow: 72.80 cfm | 123.69 m3/h
Static Pressure: 2.4 mmH2O
Connector: 4-Pin Connector
Size & Weight
Radiator: 458 (L) x 138 (W) x 38 (H) mm
Pump (w/o tubes) 98 (L) x 78 (W) x 53 (H) mm
Tube Diameter: Outer: 12.4 mm | Inner: 6.0 mm
Tube Length: 450 mm
Weight: 1977 g (Fan, Radiator, Pump, Tubes)
AMD has been using a new multi-die layout for its high-end AM4 processors for a few generations now. In these processors, the hotspot is not centered by the IHS (Integrated Heat Spreader). To still allow for optimal heat dissipation, we have developed a special mounting kit for the Liquid Freezer II that allows the cold plate to be placed directly over the hotspot of the CPU. AMD's upcoming 7000 series AM5 processors also come with multi-die layouts and can therefore benefit from the Liquid Freezer II's unique offset mounting.
Outstanding Performance
The all-in-one cooling handles the entire cooling requirements — even of the most powerful processors from Intel and AMD. It performs effortlessly with over 200 W of heat to be dissipated, which is why your CPU can be kept cool even in extreme overclocking. When it comes to competitive products from leading cooler manufacturers, the Liquid Freezer II leaves them behind in terms of both performance and noise level.
Efficient, Proprietary Pump
While many competitors use a generic water pump, we‘ve gone to great lengths to develop our own. The results? Quieter operation and higher efficiency. And, like the Liquid Freezer II’s fans, the water pump is PWM-controlled and adjusts its speed accordingly. This not only leads to significantly lower noise levels at low and typical loads, but also a much lower power consumption for all components of the AiO.
Premium Class Radiator
Unlike most all-in-one liquid cooling manufacturers, we rely on 38 mm thick radiators with a high fin density. This allows a larger amount of water to be used in the circuit and significantly increases the cooling surface area.
Water has a much higher heat capacity than aluminum or copper. This leads to a slower and an up to 5 °C lower temperature increase in the time-limited turbo mode of modern CPUs.
Specifications:
Compatibility
Intel Socket: 1700, 1200, 115X, 2011-3*, 2066* *Square ILM
AMD Socket: AM5, AM4
Pump/Cold Plate
VRM Fan: 40 mm, 1000—3000 rpm (PWM controlled)
Pump: 800—2000 rpm (PWM controlled)
Power Consumption: 0.5 W—2.7 W (Pump + VRM Fan)
Cold Plate: Copper, Micro-Skived-Fins
Thermal Paste: MX-4 (0.8 g)
Fan
Fan: ARCTIC P14 PWM 140 mm Fan x3
Fan Speed: 200—1700 rpm PWM Controlled (0 rpm below 5% PWM)
Fan Bearing: Fluid Dynamic Bearing
Noise Level: 0.3 Sone
Current: 0.12 A | 12 V DC
Airflow: 72.80 cfm | 123.69 m3/h
Static Pressure: 2.4 mmH2O
Connector: 4-Pin Connector
Size & Weight
Radiator: 458 (L) x 138 (W) x 38 (H) mm
Pump (w/o tubes) 98 (L) x 78 (W) x 53 (H) mm
Tube Diameter: Outer: 12.4 mm | Inner: 6.0 mm
Tube Length: 450 mm
Weight: 1977 g (Fan, Radiator, Pump, Tubes)
Tehničke specifikacije
| Podnožje Intel | LGA1200/1700 |
| Podnožje AMD | AM4/AM5 |
| Veličina ventilatora | 3x140mm |
| RGB | NE |
